Go Live Australia Magewell Pro Capture AIO 4K, Single Channel HDMI/SDI Capture Card - Go Live Australia


Magewell Pro Capture AIO 4K, Single Channel HDMI/SDI Capture Card

Enquire for Price

Capture a single channel of 4K resolution video with embedded audio using the Magewell Pro Capture AIO 4K Capture Card. This PCI Express x 4 capture card is compatible with DCI 4K and UHD video formats up to 4096 x 2160, and ingests using either its HDMI or its SDI (BNC) ports. Capture uncompressed video and audio from a camera or switcher on your computer for recording, editing, or streaming.

The low-profile Magewell AIO 4K is compatible with Windows, macOS, and Linux systems. Extraction of audio-formation and channel-status data, video-timing, Sony and Canon DSLR timecode, and 3D-format information is supported, as are multiple color spaces in 8- and 10-bit formats. Video processing features include frame-rate conversion, cropping, scaling, de-interlacing, and aspect-ration conversion. Multiple Magewell cards can be used and numbered in one system.

HDMI-Specific Features

  • 297 MHz HDMI receiver
  • Adaptive HDMI equalizer
  • Customized EDID support
  • Extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
  • Full colorimetry support
  • Support for 8-bit signals using RGB/YUV 4:4:4 color sampling at pixel rates no greater than 297 MHz
  • Support for 12-bit signals using YUV 4:2:2 color sampling at pixel rates no greater than 297 MHz
  • Support for 10/12-bit signals using RGB/YUV 4:4:4 color sampling at pixel rates no greater than 170 MHz
  • Extraction of audio formation information, and channel status data supported
  • Extraction of video timing information supported
  • Extraction of 3D format information supported
  • Extraction of Sony/Canon DSLR time code supported
  • Side-by-Side Half, Top-and-Bottom, and Frame Packing 3D mode supported


SDI-Specific Features

  • Integrated cable equalizer supporting cable lengths up to 755′ for HD signals
  • Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS/6G (SMPTE 2081) standards
  • Support for 2K (2048 × 1080) & 4K (4096 × 2160) mode
  • Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
  • Support for 10/12-bit color depth
  • Support for extraction of SMPTE 352 payload identifier
  • Support for up to 8 (mono) audio channels at 48 KHz (channels 1-8 from the 16 available in the SDI spec)
  • Support for extraction of audio formation information & channel status data
  • Limited support of 3Gb-DS: only the first stream can be captured
  • Limited support for capture of the first link of dual link interfaces:
    YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
    YCbCr 4:4:4 10-bit: captured as 4:2:2
    RGB 4:4:4: R/B sub-sampled


Video Capture Formats

  • Image-capture resolutions up to 4096 × 2160 pixels
  • Capture frame rates up to 144 fps (Actual capture frame rate can be limited by PCIe bandwidth and image resolution)
  • 4:2:0 8-bit capture formats: NV12, I420, YV12
  • 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
  • 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
  • 4:4:4 10-bit capture formats: V410, Y410
  • Additional capture formats are supported via Pro Capture SDK for DirectKS


Video Processing Features

  • Two video processing pipelines with ~360 MP/s processing bandwidth for each one
  • Full 10-bit video processing
  • Video cropping and scaling
  • Video de-interlacing:
    Blend top & bottom field
    Top field only
    Bottom field only
  • Video aspect ratio conversion:
    Auto or manual selection of input aspect ratio
    Auto or manual selection of capture aspect ratio
    Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding
    (Letterbox or Pillarbox)
  • Video color format conversion:
    Auto or manual selection of input color format & quantization range
    Auto or manual selection of capture color format, quantization range & saturation range
    Supports RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
    Supports Limited or Full quantization range
    Supports Limited, Full & ‘Extended gamut’ saturation range
  • Video frame rate conversion
  • Video OSD composition:
    Supports PNG OSD image (up to 4096 × 2160)
    Supports dynamic loading of RGBA OSD images via SDK


$1,006.00 GST Inc (Free Shipping)

Magewell 11170

Host Interface2 x PCI-Express Gen2
Video Resolution SupportedUp to 4096 × 2160 10/12-bit color
Frame Rates SupportedUp to 144 fps
Video Processing2 x 360 MP/s pipelines
Color Spaces SupportedBGR24, BGR32 I420, IYU2 NV12 RGB24, RGB32 UYVY V308, V408, V410 Y410, YUY2, YUYV, YV12
Supported OSWindows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64) Linux (V4L2 kernel driver source code under NDA, supports x86, x64 & arm architecture) Mac OS X / macOS 10.9-10.11, 10.12
Supported APIsWindows: DirectShow, DirectKS, Wave API/DirectSound/WASAPI Linux: V4L2, ALSA
Supported SoftwareVLC VirtualDub OBS XSplit vMix VidBlaster Wirecast Microsoft Media Encoder Adobe Flash Media Encoder Any other DirectShow/V4L2 encoding/streaming software
Input Interfaces1 x HDMI 1.4 1 x 6G-SDI via BNC
EnvironmentalOperating temperature: 32 to 104°F (0 to 40°C) Storage temperature: 32 to 158°F (-20 to 70°C Relative Humidity: 5 to 90%, non-condensing
Form FactorLow-profile PCIe x 4 add-on card
Power ConsumptionMax Current at 12V: ~ 0.39 A Max Current at 3.3V: ~ 0.2 A Max Power Consumption: ~ 5.29 W
DimensionsWithout PCI Bracket: 3.65 x 2.69" (92.79 x 68.43 mm)
Packaging Info
Package Weight0.4 lb
Box Dimensions (LxWxH)8.6 x 7.7 x 1.7"
SKU: 11170 Categories: ,