Enquire for Price
This Sachtler System FSB 6 Fluid Head with Touch & Go Plate, Flowtech 75 Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet supports cameras and accessories weighing between 3.3 and 17.6 pounds, and is well suited for DSLRs, mirrorless cameras, and small- to medium-sized camcorders. The head features a sliding balance plate with 4.7″ of adjustment to balance your camera, 10 steps of counterbalance adjustment and 3 steps plus a zero setting of independent pan and tilt drag. This amount of adjustability combines to give you precise control of your camera on the head, and the ability to easily tune your set up on a shot-by-shot basis.
The Flowtech legs are a lightweight set of tripod legs that can be used with or without the included mid-level spreader. The legs support up to 44 pounds, which means they can easily handle the weight of the FSB 6 Fluid Head with Touch & Go plate as well as your camera and accessories. The legs extend from approximately two feet to five feet and are extremely resistant to twisting when you pan. Additionally, each leg features a single locking lever near the top that allows you to open the leg sections to raise or lower the leg. The included padded carry bag is for storing or transporting the head and legs.
The Sachtler 0405 FSB-6T Fluid Head is a fluid head designed to work with the handheld size of DV, DVCAM, HVX and HDV camcorders. This head features the classic Touch and Go camera plate and was constructed with SOOM technology for performance matching larger Sachtler fluid heads.
The Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feeteschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs work weigh just under 7 pounds yet they can support a payload of up to 44 pounds, and extend from a minimum height of 24″ to a maximum height of 61″ when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections.
Each leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground, and you can snap rubber feet onto the dual spikes for better grip when working on hard or delicate surfaces.
With dimensions of 36.6 x 7.9 x 9.1″, this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.
The bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.
|Camera Plate Features||Sliding Balance Plate, Quick Release|
|Balance Plate Sliding Range||2.4" / 6 cm|
|Base Mount||75 mm Half Ball|
|Pan & Tilt|
|Drag Control||Tilt: 3-Step Plus 0 Pan: 3-Step Plus 0|
|Vertical Tilt||-70° to +90°|
|Independent Pan Lock||Yes|
|Independent Tilt Lock||Yes|
|Load Capacity||3.3 to 17.6 lb / 1.5 to 8 kg|
|Counter Balance||Incremental 10-Step|
|Bubble Level||1 x Illuminated|
|Operating Temperature||-40 to 140°F / -40 to 60°C|
|Weight||4.7 lb / 2.1 kg|
|Box Dimensions (LxWxH)||18.1 x 10.1 x 8.2"|
|Head Mount Type||75 mm Bowl|
|Load Capacity||44 lb / 20 kg|
|Maximum Working Height||60.24" / 153 cm|
|Minimum Working Height||10.24" / 26 cm|
|Folded Length||26.8" / 68 cm|
|Materials||Aluminum, Carbon Fiber|
|Weight||6.4 lb / 2.9 kg|
|Leg Lock Type||Flip Lock|
|Box Dimensions (LxWxH)||28.0 x 7.0 x 6.0"|