Teradek Bolt 500 XT SDI/HDMI Wireless Deluxe Kit (Gold Mount) | Go Live Australia

Catalogue

Teradek Bolt 500 XT SDI/HDMI Wireless Deluxe Kit (Gold Mount)

Enquire for Price

This Teradek Bolt 500 LT Deluxe Kit includes one transmitter and one receiver with installed Gold mount, plus a variety of accessories. This enables you to immediately start transmitting up to 1080p60 video from either an SDI source. The zero latency transmitter/receiver pair features a 500′ line-of-site transmission distance when used together. You can send and receive visually lossless 3G-video signals from a Bolt 500 transmitter with zero latency. The transmitter features a loop out SDI connector so you can feed your on camera monitor.

The receiver has a factory installed Gold mount battery plate and features an SDI output. The system supports digital SD and HD signals. The inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i. You can transmit to a total of four receivers, including other Bolt 500 XT, LT, Sidekick II and 703 Bolt receivers. The built-in AES 128-bit encryption helps to keep your transmitted video safe from prying eyes. Accessory arm and NATO mounts provide mounting options, and the SKB case protects your gear during transport and storage.

 

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter

With the Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 500 receiver with zero latency. The Bolt XT is compatible with existing third-generation Bolt systems such as the Bolt 500, 1000, Sidekick II, and 703 Bolt, as well as the Bolt LT. The transmitter unit can be secured to a camera or other SDI/HDMI video source via a built-in 1/4″-20 threaded hole, as well as two M3 threaded holes. The included antennas provide a powerful signal that can travel up to 500′ line of sight.

A shoe mount is included for attaching to cameras without 1/4″-20 threads. For convenience, both a standard BNC cable and HDMI cable are included so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers. Built-in AES-128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.

  • Backward compatible with third-generation Bolt 500, 1000, 300, Sidekick II, and 703 Bolt
  • HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter
  • SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
  • 1/4″-20, 3/8″-16, and ARRI rosette mounting points

 

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver

With the Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver you can receive visually lossless 3G-video or HDMI signals from a Bolt 500 transmitter with zero latency. The Bolt XT is compatible with existing third-generation Bolt systems such as the Bolt 500, 1000, Sidekick II, and 703 Bolt, as well as the Bolt LT. The receiver unit can be secured via built-in 1/4″-20 or M3 threaded holes.

A light stand adapter is included for mounting on stands. For convenience, a standard HDMI cable is included so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector. A D-Tap power cable is included for attaching to a battery. The receiver can share the transmitter with up to three other receivers. It features built-in AES-128 encryption that protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.

  • Backward compatible with third-generation Bolt 500, 1000, 300, Sidekick II, and 703 Bolt
  • The receiver includes built-in cross conversion and Teradek’s proprietary software utilities including a manual frequency-selection tool, 3D LUT engine, and a 5 GHz spectrum analyzer to keep an eye on interference in your area
  • SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
  • OLED Screen with menu joystick navigation
  • 1/4″-20 and M3 mounting points

 

Wooden Camera Ultra Arm Mini Monitor Mount (1/4″-20 to 1/4″-20)

The 1/4″-20 to 1/4″-20 Ultra Arm Mini Monitor Mount from Wooden Camera is a robust and compact articulating arm with 25mm ball joints. Approximately 5″ in length from end to end, the Ultra Arm Mini is designed for keeping a monitor or other accessory close to the camera while providing the full range of ball joint articulation. A lever in the center locks both ball joints, and the mounting points on the ends attach to your gear easily at the turn of integrated tightening knobs. Both ends feature rubber pads for more secure support.

The Ultra Arm system is interchangeable. Wooden Camera offers a variety of optional end points that install into the ball sockets of the arm. These include NATO clamps, NATO rails, shoe mounts, super clamps, and extensions to add between two of these arms. There is even a Preston mounting bracket. Additionally, the system is compatible with many third-party 25mm ball mount systems.

  • Full-range ball joint articulation
  • Integrated tightening knobs
  • Rubber pads
  • Interchangeable end points support optional NATO clamps, NATO rails, shoe mounts, super clamps, length extensions, and more (see Accessories tab)
  • Also compatible with third-party 25mm ball mount systems

 

Wooden Camera NATO Lock Kit

Quickly secure and detach accessories from your camera rig by adding this NATO Lock Kit from Wooden Camera. The rail attaches to your camera or cage system using the included 1/4″-20 or 3/8″-16 screws while the clamp attaches to the accessory itself via an additional set of 1/4″-20 and 3/8″-16 screws. The rail and clamp are compatible with other NATO standard accessories from RED, Zacuto, and other 3rd party manufacturers.

 

What’s Included in the Box:

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter

  • D-Tap Power Cable (18″)
  • Shoe Mount
  • 2 x Antenna
  • SDI Cable (10″)
  • Limited 1-Year Warranty

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver

  • Thumbscrew
  • Light Stand Adapter (1/4″-20)
  • USB 3.0 Cable Type-A to Micro-B
  • BNC Cable (10″)
  • PSU 2-Pin Connector to 18W AC Adapter Cable (6′)
  • Limited 1-Year Warranty

Wooden Camera Ultra Arm Mini Monitor Mount (1/4″-20 to 1/4″-20)

  • Limited 1-Year Warranty

Wooden Camera NATO Lock Kit

  • 2 x 1/4″-20 Screws
  • 2 x 3/8″-16 Screws
  • Short 1/4″-20 Thread
  • Limited 1-Year Warranty

SKB Case with Custom Foam (13.5 x 9.5 x 6.5″)
Teradek Vinyl Zipper Bag
2.5mm Hex Key
3/16″ Hex Key
Gold Mount Battery Plate, Factory Installed on Receiver

Buy

$4,400.00 GST Inc (Free Shipping)

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter Specs

Construction Milled Aluminum Chassis and Regulation-Compliant PCB
Video Inputs SDI: 1 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI Type A Receptacle
Video Outputs SDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through
Color Sampling SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled) HDMI: RGB 4:4:4, 8-Bit
Latency <0.001 Seconds (TX to RX without Format Conversion)
Supported Resolutions 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480i: 59.94 576i: 50
Video Processing Compression Visually LosslessColor Correction CDL/1024 1D LUT (Supports 10-Bit Color) 33x33x33 3D LUT (Supports 10-Bit Color)
Audio Compression 48 kHz, 24-bit PCM
Audio Input Embedded
Interfaces Switches: On/Off and Reset Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows USB Interface Functionality: Upgrade via Mini-USB
Wireless Non-DFS Frequencies
  • UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
  • EU & JP: 5.19 to 5.23 GHz
DFS Frequencies
  • US: 5.27 to 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 to 5.67 GHz
RF Power 17 dBm EIRP
Encryption AES-128
Range Up to 500' / 152.4 m Line of Sight
Unicast Multicast Unicast / Multicast
Noise Rejection Can Coexist with Wi-Fi and 5 GHz Cordless Phones
Power Input 2-Pin Connector 7 to 17 VDC
Power Consumption Nominal 7.3 W (Measured at 1080p60)
Operating Temperature 32 to 104°F / 0 to 40°C
Mountable 1 x 1/4"-20 Threaded Mounting Hole 2 x M3 Threaded Mounting Holes
Dimensions 0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm
Weight 8 oz / 226 g
Packaging Info
Package Weight 1.65 lb
Box Dimensions (LxWxH) 6.7 x 6.5 x 4.8"

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver Specs

Construction Milled aluminum Chassis and Regulation-Compliant PCB
Video Outputs SDI: 2 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI Type A Receptacle USB: 1 x USB Type 3.0 Micro-B Receptacle
Color Sampling SDI: YCbCr 4:2:2, 10-Bit (8-Bit when Format Conversion is Enabled) HDMI: RGB 4:4:4, 8-Bit
Latency <0.001 Seconds (TX to RX without Format Conversion)
Supported Resolutions 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 576p: 50 (via HDMI Only) 480p: 59.94 (via HDMI Only) 576i: 50 480i: 59.94
Video Processing Compression Visually LosslessColor Correction CDL/1024 1D LUT (Supports 10-Bit Color) 33x33x33 3D LUT (Supports 10-Bit Color)
Audio Compression 48 kHz, 24-Bit PCM
Audio Input Embedded
Interfaces Switches: On/Off and Reset Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows USB Interface Functionality: Upgrade via Mini-USB
Wireless Non-DFS Frequencies
  • UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
  • EU & JP: 5.19 to 5.23 GHz
DFS Frequencies
  • US: 5.27 to 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 to 5.67 GHz
RF Power 15 dBm EIRP
Encryption AES-128
Range Up to 500' / 152.4 m Line of Sight
Unicast Multicast Unicast / Multicast
Noise Rejection Can Coexist with Wi-Fi and 5 GHz Cordless Phones
Power Input 2-Pin Connector 7 to 28 VDC
Power Consumption Nominal 9 W (Measured at 1080p60)
Operating Temperature 32 to 104°F / 0 to 40°C
Mountable 1 x 1/4"-20 Threaded Mounting Hole 2 x M3 Threaded Mounting Holes
Dimensions 6 x 3.4 x 1" / 15.24 x 8.64 x 2.54 cm
Weight 10.5 oz / 297.7 g
Packaging Info
Package Weight 2.25 lb
Box Dimensions (LxWxH) 6.7 x 6.6 x 5"

Wooden Camera Ultra Arm Mini Monitor Mount (1/4"-20 To 1/4"-20) Specs

Top Mount 1/4"-20 Male
Bottom Mount 1/4"-20 Male
Points of Articulation 2
Maximum Length 5" / 12.7 cm
Weight 4.8 oz / 136 g
Packaging Info
Package Weight 0.415 lb
Box Dimensions (LxWxH) 5.35 x 2.6 x 2.05"

Wooden Camera NATO Lock Kit Specs

Compatibility RED Swat rails Zacuto Z-rails Other 3rd party NATO products
Dimensions 1.9 x 1.9 x 0.7" (47.2 x 47.2 x 18.3 mm)
Weight 0.1 lb (50 g)
Packaging Info
Package Weight 0.13 lb
Box Dimensions (LxWxH) 3.2 x 2.7 x 0.85"
SKU: TD-10-1935-1G Categories: ,