Go Live Australia Teradek COLR - Go Live Australia

Catalogue

Teradek COLR

Enquire for Price

Product Features:

  • LUT Box (CDL 1D and 33-Point 3D LUTs)
  • HDMI/SDI Cross-Converter
  • Wireless Controller for Ethernet Cameras
  • Supports 10-Bit Colour
  • Simultaneous HDMI and SDI Outputs
  • Integrates with Pomfort LiveGrade Pro
  • Supports Virtually Every Camera Signal
  • Compatible with Virtually All Monitors
  • Convert RAW & LOG Signals for Monitoring

 

COLR is a real-time LUT box, camera control bridge, and HDMI/SDI cross-converter in one tiny package. COLR integrates with Pomfort LiveGrade Pro, allowing DITs and colourists to give everyone the right look.

Looks Mean Everything
During camera prep, on your cart, through colour timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button. For even more control over the look of your footage, COLR Duo offers two fully configurable SDI outputs, allowing you to display two independent 33pt 3D LUTs or even the same LUT across two monitors.

Works with Pomfort LiveGrade
COLR is integrated with Pomfort LiveGrade Pro, giving you fine control over your LUTS using WiFi, Ethernet, or USB. Each LUT can be sent to COLR and applied to your image immediately from within the application.

Monitor Calibration with SpectraCal
Whether your production requires industry standard colour and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. With SpectraCal’s CalMAN software, you can use the COLR and COLR Duo to calibrate a video display with a 10-bit 33pt 3D LUT. To learn more, visit the CalMAN Setup Guide.

Connected Set
With COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final colour grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.

What’s in the box: 

  • 1 x Power Supply Unit 2-pin Connector to 18W AC Adapter(Int) – 1.8m Cable
  • 2 x SDI – BNC to BNC Cable
  • 1 x Quickstart Guide – COLR
  • 2 x Antenna 2dBi WiFi 2.4/5.8 GHz
  • 1 x Mini-USB to USB – 45cm Cable
  • 1 x Free Trial Code for Pomfort LiveGrade Pro
  • 1-Year Warranty

 

 

Buy

$2,195.00 GST Inc (Free Shipping)

Video

  • Video Inputs: 1 x SD/HD/3G-SDI (75 Ohm BNC) 1 x HDMI Type-A receptacle
  • Video Outputs: 1 x SD/HD/3G-SDI (75 Ohm BNC) 1 x HDMI Type-A receptacle
  • Color Sampling:
  • SDI Input/Output: 10-bit YCrCb 4:2:2
  • HDMI Input: supports 8-bit RGB 4:4:4, 8-bit YCrCb 4:4:4, 12-bit YCrCb 4:2:2
  • HDMI Output: 8-bit RGB 4:4:4

Supported Resolutions

  • 1080p 23.98/24/25/29.97/30/50/59.94
  • 1080i 50/59.94/60
  • 1080PsF 23.98/24/25
  • 720p 50/59.94/60
  • 480p59.94, 576p50 (HDMI only)
  • 480i59.94, 576i50

Video Processing 

  • Test Pattern Generator Support: None
  • Video Format Conversion Support: None
  • Color Correction: CDL/1024 1D LUT (supports 10-bit color) 33x33x33 3D LUT (supports 10-bit color)

Protocol Support

  • Network Protocols: TCP/IP, UDP, HTTP, DHCP
  • Software Or Platform Integration: Pomfort LiveGrade, SpectraCal CalMAN, and more

Inputs

  • Audio Input: Embedded HDMI and SDI Audio Input

Outputs

  • Audio Output: Embedded HDMI and SDI Audio Output

Physical

  • Dimensions: 50.8 x 25.4 x 101.6 mm (2” x 1” x 4” )
  • Weight: 170.1g

Interfaces

  • Http: WebUI for Configuration and Control
  • Configuration Interfaces: OLED Display with joystick navigation buttons
  • Switches: On/Off Switch
  • Usb Interface Functionality: Powered USB 2.0 host port

Network

  • Ethernet: 10/100/1000BASE-T Gigabit
  • Wireless
  • WiFi: 2.4/5GHz 802.11 ac/a/b/g/n MiMO
  • Rf Channel Selection: Auto with 3 modes: (2.4 or 5 Ghz), Auto (2.4 GHz only), Auto (5 Ghz only), Configurable to specific channels

Power

  • Power Input: 2 Pin Connector Power Input
  • Nominal Power Consumption: 8W, 7W(no WiFi)
  • Auxiliary Power Input: 6-28V DC
SKU: TD-10-0070 Categories: ,